Unicorsa.com.ar

Unicor s.a.
CETC - AV6416
www. unicorsa.com.ar AV6416 : Palm OTDR
AV6416 palm OTDR is the newest instrument designed for testing FTTx network. It´s mainly
used to measure the physical characteristics of optical fiber under test, such as the length,the
transmission loss and the splice loss etc. It can also locate the faults or breaks of optical fiber. It
´s widely applied in the manufacture, construction and maintenance in optical fiber
communication system.
AV6416 palm OTDR has the most advanced technology of double-color & material integrative
mould,which is novel and beautiful in appearance.AV6416 offers three wavelengths and VLF in
one handheld unit, especially for testing passive optical network (PON) in FTTx. In addition, it´s
equipped with comfortable gallus for carrying conveniently.
Mainly features:
ο handheld,lightweight and convenience for carrying
ο The most advanced technology of double-color & material integrative mould in trade
ο Advanced anti-reflective TFT LCD,visible clearly in field
ο 1.6m extra-short event dead zone
ο Communication light check automatically
ο 0.25m high resolution,65534 sampling points
ο Fast auto measurement,one-button operating
ο Double USB interfaces, supporting USB stick and direct cable download to PC via
ActiveSync
ο Supporting Bellcore GR196 file format in writing or reading
ο Function of intelligent indicating of remaining capacity of battery and warning if the voltage
of battery is low.
ο WinCE operation system, double operating interface of Chinese and English
ο Built-in lithium battery with high capacity for over 10 hours of operating life
ο Visible fault locating (VFL)
ο Universal FC/PC,FC/SC,FC/ST connector type, it´s convenient for surface cleaning
ο Unique function of updating system on-line, returning to factory is unnecessary
ο Extra-short event dead zone
AV6416 palm OTDR has extra-short event dead zone, which is suitable for testing short
optical fiber and pigtail optical fiber.

Unicor s.a.
CETC - AV6416
www. unicorsa.com.ar
ο High-speed auto measurement
The function of auto measurement of AV6416 palm OTDR makes it unnecessary to operator
to know about the further details of operating. Simply connect the fiber, press [Start],then the
result is displayed in a few seconds, you can view the trace and event table.

ο High-speed auto analyzation
AV6416 can search and locate the events and faults in trace rapidly and precisely, and then
lists all events in even table, so it´s very useful to maintainers to improving efficiency and it´s
unnecessary to know about the relative background knowledge.

ο Powerful file management
AV6416 offers powerful function of file management. Besides saving,browsing or deleting files
to or from USB stick and built-in memory, it can be connected to laser or inkjet printer based on
PCL language, and the testing report can be printed rapidly and easily. In addition, AV6416 can
communicate with PC using ActiveSync via USB cable, through which the files can be
translated rapidly.

Unicor s.a.
CETC - AV6416
www. unicorsa.com.ar
ο Convenient VFL
The built-in 650nm visual fault location is ideal for easily identifying bad splice, bad connector,
break or macro bend.

ο Communication light check
When measuring a fiber in service, the measuring result by an OTDR is not precise, and
there is a potential risk of permanent damage to the internal photoelectric of OTDR receiver. To
prevent these problems, the AV6418 OTDR can detect automatically and silently if
communication light is present after the fiber under test is connected, once the light is verified
present, simultaneously, a warning message will be displayed and internal OTDR protection will
be active instantly.

Unicor s.a.
CETC - AV6416
www. unicorsa.com.ar AV6416 Palm OTDR is mainly used to measure FTTx network, it provides a low cost solution for users. AV6416 offers three measuring modes: manual mode (including real time mode and average mode), auto mode and dead zone mode.
Manual measurement mode: manual mode is suitable for skilled operator who is familiar with the instrument. In this measurement mode, to get more accurate results, real-time mode or average mode can be selected if necessary.
In real-time mode, the dynamic changes of fiber chain can be detected timely, it is very useful when you need to observe the effect and process of fiber being spliced or connected.
In average measurement mode, the noise in trace can be suppressed, and the SNR(signal noise ratio) is improved, therefore,the result is more accurate. In fact, the more average times is executed, the more noise in trace is suppressed, and the longer time is spent for signal processing. In practice, the average times should be set properly according to necessity.
Auto measurement mode: the optimized measurement conditions are set automatically, it´s unnecessary to operator to know about the complicated background knowledge and the further details of operating. In this mode, the more accurate results can be gained when proper average times are set, but it will increase the time of signal processing.
Dead zone mode: this mode is suitable for testing optical fiber with short distance and the optimized settings of distance range, pulse width and attenuator can be executed automatically. To get the best result, the terminal return loss should be guaranteed less than -40dB.
Main OTDR Modules Center wavelength (build-in filter) (build-in filter) Type of optical fiber Distance Measurement ±(1m + sample space + measurement distance×0.003%) Sampling Resolution 0.5, 1, 2, 4, 8, 16, 32, 64, 128, 256km

Unicor s.a.
CETC - AV6416
www. unicorsa.com.ar 10 , 30 , 80 , 160 , 320 , 640 , 1280 , 5120 , 10240ns Group refractive index 1.00000 - 2.00000 (0.00001 steps) Color LCD(touch screen) Optical Connector FC/UPC (universal connector) 650nm ± 10nm,2mW(typical);CW/1HzUser selectable : simplified Chinese, English, Russian, Korean etc.
(please contact CETC 41st for others) DC:15V to 20V(3A),(AC adapter 100～240V, 50/60Hz,1.5A),Built-in Lithium battery:4400mAh,7.4V,operating time≥10 hours3 1 kg Approx.
Note 1:pulse width 10240ns, average times≥300,SNR=1,23 Note 2:dead zone mode, distance range : ≤ 4km, pulse width:10 ns, terminal reflection loss:≥40 dB, typical;Note 3:low brightness, exclude measuring.
Unicor s.a.
CETC - AV6416
www. unicorsa.com.ar ο Main frame AV6416 Palm OTDRο Standard accessories Quality certification Trace analyzing software(CD) Hard Carrying case(Including gal us) Special gallus of instrument Note: the standard OTDR interface type is FC/UPC.
Saving measuring data Hp laser Jet P2015d or Hp laser Jet 1022 Communicating with PC Special battery pack for Standby battery pack Note:For the necessity of improvement, the material contained in this document is subject to change without notice.
Unicor s.a.
Optical Access Networks - GEPON - Metro Ethernet Zenon López 1594 (5972) Pilar - Cordoba Argentina Tel.: 00 54 (3572) 470578 e-mail: [email protected]

Source: http://www.unicorsa.com.ar/archivos/datasheet/AV6416%20-%20Palm%20OTDR.pdf